700R4 Manual Lock Up Wiring. So, make sure this information is applicable to your type of 700r4 (again mine was a '92 version). Im wiring up my 700r4 with a switch to lock up the converter.
700r4 Lockup Wiring Vacuum Switch from wiringall.com
Web what does a 700r4 lockup kit do? The transmission should shift into overdrive and lock the converter. Web tan/black is another of the wires;
Web 700R4 Lock Up Wiring All 700R4 Transmissions Are Wired For Torque Converter Lock Up In 4Th Gear Only And Are Checked On Our Dyno For Proper Operation Prior To Shipment.
If it has 2, you are off to a good start. So, make sure this information is applicable to your type of 700r4 (again mine was a '92 version). This kit will work with both carbureted and fuel injected engines and saves.
Web What Does A 700R4 Lockup Kit Do?
The transmission should shift into overdrive and lock the converter. Wiring the circuit up is a simple task for the average. There are 3 wires coming off the tranny.
Route the red wire from the brake switch to a ( 20 amp ) fused ignition power source. Web i've learned a lot over the winter rebuilding my chevy automatic transmissions. Run the red wire to a fused keyed hot terminal.
Thanks A Bunch To Michelle For Letting Me Take Over The Basement All Winter.
It's the wire that causes the tc clutch to lock up when a ground is present on this wire. Im wiring up my 700r4 with a switch to lock up the converter. Web been a long time, but what you might want is a pressure switch, screwed into the port that has pressure only in 4th gear.
The 700R4 Had Many Valve Body Configurations.
Originally, this ground came from the. Now look for a pressure. Web tan/black is another of the wires;
